Skip to content
18" Swivling Starlink Roof Mount, Square V2 Dish Compatible
$79.99
Product Description
The 18" Swivling Starlink Roof Mount will work with the V2 Square Starlink Dish. This will not work with Starlink V1 Dishes so please note this before purchasing.
The great thing about this mount is it gets many above the snow limits of snow that accumulates in many areas of this great country. On this design we go down to a six inch low profile stub mount, a nine inch version and an 18" version.
The base to this is very useful when mounting STUFF. It does not matter if you are mounting Starlink or maybe you want it for a smaller pipe id such as ones for off air antennas, security cameras ..... Whatever. This mount will mount other stuff too with such ease.
In this prototype mount we see as the evidence and pictures depict how it mounts to a swiveling eave mounts perfectly. So sturdy. The actual pic being used in this add is on a 200 year old structure in Massachusetts. Thank you Salvy for the Great pics.
Salvy gets hit with a lot of snow up there and this mount was designed specifically to push Salvey up a few extra inches above the 12" starlink mast size to address that.. It mounts with lag bolts on any shingled roof. If you want something more elaborate you can put it onto of a Commdeck too which is a great paring for this item. Any Pipe under 1.35" OD can be stabilized securely with this mount.
The inner diameter fit is very tight with little wiggle. Four 1/4'" thumb set screws are included but Starlink has a plastic base. We supply four 1/4" set screws which only need to be tightened with a twist of a thumb.
We do offer shorter and longer versions of this mount configuration. The very Low profile versions will not need support braces and this should be the main consideration.
An 18" mast size should be fine without support braces but we suggest additional support such as support braces when extending about this limit.
The mount is not Starlink certified or approved! Please use this mount at your own risk! We will not be held liable for any damages resulting from using this mast!
The great thing about this mount is it gets many above the snow limits of snow that accumulates in many areas of this great country. On this design we go down to a six inch low profile stub mount, a nine inch version and an 18" version.
The base to this is very useful when mounting STUFF. It does not matter if you are mounting Starlink or maybe you want it for a smaller pipe id such as ones for off air antennas, security cameras ..... Whatever. This mount will mount other stuff too with such ease.
In this prototype mount we see as the evidence and pictures depict how it mounts to a swiveling eave mounts perfectly. So sturdy. The actual pic being used in this add is on a 200 year old structure in Massachusetts. Thank you Salvy for the Great pics.
Salvy gets hit with a lot of snow up there and this mount was designed specifically to push Salvey up a few extra inches above the 12" starlink mast size to address that.. It mounts with lag bolts on any shingled roof. If you want something more elaborate you can put it onto of a Commdeck too which is a great paring for this item. Any Pipe under 1.35" OD can be stabilized securely with this mount.
The inner diameter fit is very tight with little wiggle. Four 1/4'" thumb set screws are included but Starlink has a plastic base. We supply four 1/4" set screws which only need to be tightened with a twist of a thumb.
We do offer shorter and longer versions of this mount configuration. The very Low profile versions will not need support braces and this should be the main consideration.
An 18" mast size should be fine without support braces but we suggest additional support such as support braces when extending about this limit.
The mount is not Starlink certified or approved! Please use this mount at your own risk! We will not be held liable for any damages resulting from using this mast!
Product Reviews
Recently Viewed Products
Departments
Call or Text Us At 330-245-7947 with Questions
