HH90 STAB Motors – Direct from Italy
Motorize your Ku-Band dish and run it with a Receiver with DiSEqC 1.2 capabilities.
This unit works off of the single coax cable that is used to power the LNBF. This STAB Motor will let you move your
Ku-Band dish (Up to 95cm in size and Up to 22 lbs.) to different Satellites for MORE FREE TO AIR CHANNELS.
Horizon-to-Horizon STAB Motor for use with dishes up to 95cm in diameter.
| Operating protocol | DiSEqC 1.2, USALS |
| Maximum antenna diameter | 95 cm (37″) |
| Maximum antenna weight | 10 Kg (22 lbs) |
| Pole support diameter | Dia 35 to 68mm |
| Antenna support length | 145 mm (5.5″) |
| Antenna support diameter | 42 mm (1 5/8″) |
| Rotation angle | ±65 ° |
| Rotation speed | 2.4°/s (18V);1.5°/s (13V) |
| Operating power supply | 13 / 18 Vdc |
| assorbimento in stand-by | 40 mA |
| Consumption in stand-by mode | 180 mA |
| Consumption in operating mode | 350 mA |
| Operating temperature | -40°C ÷ +80°C |
| Maximum relative humidity | 100% |
| Programmable positions | 49 satellites |
| Programmable positions USALS | no limits |
| Preset positions | 28 satellites |
| Connectors | F Type |
| Connection | Sat coaxial cable |
| Mechanical limits | ±72° |
| Software programmable limits | From 5° a 65° |
| Fine tuning | Impulse 0.1° |
| Inclination on the pole | From 10° a 70° |
| Weight | 2.6 Kg (5.5 lbs) |
Reviews
There are no reviews yet.