1 5/8″ OD to Starlink Quick Pipe Adapter for V1 Round Starlink Dish (Charcoal Grey, High Gloss)
This Starlink Pipe Adapter allows you to install a V1 Round dish on an existing 1 5/8″ mast in 10 minutes with a very tight fitting adapter from both ends.
Powder coating finish provides protection from the elements but is also a very beautiful black “Satin” finish similar to the 12″ Starlink mast.
For a Starlink Pole Mount we recommend going to home depot and buying a 1 5/8′ OD 72″ galvanized fence pole for under $15.00. Be sure to get a bag of Quickcrete. Once the pole is set just place this on the pole in under 5 minutes.
If you have a pre existing Dish Network Mount just use the same mount and place this over it. If you want a j mount we have numerous models that will fit the bill.
Slide pipe adapter onto existing pipe / pole / mast. Tighten Bolts. Check to make sure the adapter is level in two perpendicular directions. Do not over tighten bolts.
- Tight Fitting 6/100″ Gap on the starlink side, 3/100″ on the 1 5/8″ side.
- Converts any 1 5/8″ pipe to Starlink V1 in Under 5 minutes
- Powder Coated / Charcoal Grey Gloss
- Weight: 1.5 lbs.
- Ships FAST and Inexpensively. USPS 2-3 day priority is less than $10 in most parts of the country. Fedex ground is guaranteed in two days.